Learning function guide:

1：将机顶盒遥控器与原电视机遥控器红外线发射管对准在同一直线上，距离不超过5厘米，不得抖动；

1: the set-top box remote control and remote control of the original TV set of infrared emission tube aligned on the same line, the distance is not more than 5 cm, not jitter;

2：按住机顶盒学习遥控器“设置”键不放保持3秒，见到遥控器上的指示灯由暗变亮且常亮时，进入学习状态（10秒内失效）；

2: press and hold the set top box learning remote control "set" button to keep 3 seconds, to see the lights on the remote control from dark to light and often bright, to enter the learning state (10 seconds);

3：按下被学习遥控器按键（如原电视机遥控器上的电源键）2秒左右进行学习，机顶盒遥控器在接收信号时指示灯会快速闪烁，接收成功后指示灯会慢闪2下后保持长亮；

3: press the remote control button is learning (such as TV set device on the power button for 2 seconds) by learning your set-top box remote indicator light flashes quickly when the signal is received, the receiving success indicator will flash slowly after 2 long bright;

4：按下所要学习的按键（如机顶盒遥控器上的电源键），按键后指示灯会闪烁3下后保持长亮，表明已经学习成功，按“设置”键保存退出学习功能，指示灯熄灭，完成学习；

4: press the button to learn (such as on the set-top box remote power button), button indicator light flashes 3 times after the long light, that has been successful, click "Settings" button to save and exit the learning function, indicator lights, complete the study;

5：按上面方法可以完成其他按键的学习。（学习型遥控器一般来说只学习原电视机遥控的“电视机电源”、“音量或频道”、“TV/AV切换键”）

5: according to the above method can complete the other key learning. Learning remote control in general, only to learn the original TV remote control "TV power," "volume or channel", "TV/AV switch key"